AARC-EVAC External Interface Unit
The AARC-EVAC EIU (External Interface Unit) is a transmitter designed to be wired to a source external to the AARC-EVAC system. That wired connection enables the external source to trigger the EIU, which sends the alarm or alert to Evac Controllers. Any one of the alarms or messages on the AARC-EVAC system can be configured to be triggered by an EIU Unit. The EIU is handy for incorporating existing alert systems or specialised alert equipment like fire panels and door alarms with an AARC-EVAC system.
|Trigger Input||2-wire normally open input, trigger requires momentary contact closure, voltage free/dry contact only|
|Dimensions||127mm (L) x 70.7mm (W) x 25.5mm (H)|
|Weight||92.6g (without batteries)|
|Batteries||2 x AAA (UM-4 1.5V) Alkaline Type*
• Batteries should be replaced every 6 months to ensure they are always fresh
• Replacement of batteries should be added to your company or organisation’s standard maintenance schedule
|Mounting Holes||4.5mm dia. (suit M4 tapping screws)|
|Unique Coded Digital Radio||Yes (over 4 billion unique digital codes)|
|Operating Range||Up to 300m (depending on transmitter & receiver location)|
*Warning: Do not use Lithium type 1.5V cells, as this type of battery may damage the unit.